Honda alloy wheel nuts. M12 x 1.5, 19mm Hex Radius set of 16

Description

This listing is for a set of 16 alloy wheel nuts

If you need a different amount of alloy wheel nuts check the site as there are sets of 4,5,16 and 20 alloy wheel nut available at discounted prices.

High Quality

Made from 10.9 grade heat treated carbon steel with a zinc plated finish for durability. This alloy wheel nut meets all required UK and EU standards.

Check the additional information tab for more specs about this alloy wheel nut and you can see the cars that these alloy wheel bolts fit in a list just under the add to cart button above.

Car Fitments

If you are unsure about the fitment you need for your car try using the shop by car make in the menu above, if you are still concerned then feel free to contact us and we will be happy to assist.

We use industry standard data and all the car details listed on this page are the standard fitments for use with this alloy wheel nuts to the very best of our knowledge.

These nuts have a radius seat and will fit the genuine manufacturer’s alloy wheels, however if you are fitting aftermarket alloy wheels you will most likely need 60 degree taper alloy wheel nuts. You should check the nut holes of your wheels to be sure. There are taper nuts available on the website.

If you want to fit spacers to your wheels, some aftermarket alloys might require a spacer if the offset if different to that of the manufacturer, you will need to use extended studs. It is the same principal as extended threads for bolts, but because alloy wheel nuts only have an internal thread, it is the stud that comes out of the wheel hub that needs extending. Check out range of studs to find what you need.

If you have any questions about what fitment you need please feel in the contact form on the contact us page. We usually respond with in 2 hours during normal business times.