Volvo Alloy wheel nuts. M12 x 1.5, taper seat, 19mm Hex with captive washer

Description

This listing is for a set 20 Volvo alloy wheel nuts

Volvo alloy wheel nuts are different to many standard nuts. These nuts are designed specifically for Volvo alloy wheels. There is a captive washer giving the seat a diameter of 28mm, approx 4-5mm wider than most other nuts.

If you need more than one set alloy wheel nuts you can add more sets in the quantity field above.

High Quality

Made from 10.9 grade heat treated carbon steel with a zinc plated finish for durability. These alloy wheel nuts meet all required UK and EU standards.

Check the additional information tab for more specs about this alloy wheel nut and you can see the cars that these alloy wheel nuts fit in a list just under the add to cart button above.

Car Fitments

If you are unsure about the fitment you need for your car try using the Tec Specs in the menu above, if you are still concerned then feel free to contact us and we will be happy to assist.

This is the list of the common fitments: 440, 740, 760, 780, C30, C70, S40 (2005 on), S90, V40 (2012 on), V90

We use industry standard data and all the car details listed on this page are the standard fitments for use with these alloy wheel nuts to the very best of our knowledge.

These Ford alloy wheel nuts have a sleeve and 60 degree seat captive washer which is the correct style for genuine Ford alloy wheels. If you do have aftermarket alloy wheels then you will need a standard 60 degree nut without the washer.

If you are looking to fit spacers there are special sleeve nuts available to allow a small amount of extra width or you will need extended studs.

If you have any questions about what fitment you need please feel in the contact form on the contact us page. We usually respond with in 2 hours during normal business times.